Select Page

CoolSculpting

CoolSculpting® is a non-invasive procedure for the reduction of unwanted fat tissue, utilizing a patented method known as cryolipolysis, or the use of cooling to break down fat. CoolSculpting® employs precisely controlled cooling to naturally reduce unwanted fat in areas such as the abdomen, flanks, upper arms or neck and jowls (double chin). Only fat cells are frozen and once crystallized, these fat cells are naturally eliminated from your body. During the hour-long in-office procedure, patients wear a special applicator around their treated areas and can comfortably read a newspaper or book or watch a video while their “bulges” are frozen away. We have extensive experience with CoolSculpting as our physicians were part of the clinical trials that led to the approval of CoolSculpting in the U.S.

Our verdict: In properly selected patients, Coolsculpting results in a noticeable, natural-looking reduction of fat bulges without the pain, risk, and recovery time of invasive procedures. When treating areas we recommend as appropriate for this procedure, we have seen excellent results in more than 90% of our cases. Results appear over the course of 2-4 months after as little as one treatment. Significant reduction in the fat layer may result in some skin laxity; if needed that can typically be addressed with appropriate skin tightening treatments. We have found that the new applicators such as Coolcurve+ and CoolMini enable effective treatment in an expanded set of areas, such as saddle bags, arms or submental fat (the fat under the chin). Please remember that CoolScultping is not a way to lose weight or treat obesity.

Why choose Union Square Laser Dermatology for CoolSculpting?
Our physicians have extensive clinical experience with CoolSculpting, starting with the clinical trials that led to its approval in the U.S. We continue to work with Zeltiq, CoolSculpting’s manufacturer, on refining treatment protocols, and thus our patients get the benefit of the latest treatment protocols, applicators and software upgrades. In many situations CoolSculpting works best in combination with other treatments to further address undesirable fat or to tighten the skin, and our comprehensive range of non-surgical body contouring and skin tightening devices and our expertise in administering combination treatments allows us to design the best personalized non-surgical body contouring plan for each patient. We have an extensive track record of obtaining the best results in areas such as saddle bags, arms, hands, chin and jowls; we also have the understanding of the underlying anatomy and physiology to achieve these results while preserving patient safety.

coolmini

CoolMini applicator

Latest Applicator: CoolMini
The FDA recently cleared the CoolSculpting Mini Applicator for use in the submental area, i.e., to reduce the fat under the chin. This type of treatment in the patients’ face should be performed only by experienced physicians that are familiar with the anatomy and physiology of the face and neck. At Union Square Laser Dermatology we have experience with several approaches treating these areas, including our comprehensive range of body contouring and skin tightening treatments, as well as injectable alternatives.

 

Q: What is CoolSculpting?

CoolSculpting is a new, non-invasive treatment to gently reduce fat in targeted areas of the body using advanced cooling technology to eliminate fat cells, resulting in a noticeable, natural-looking fat reduction in the treated areas.

Q: Does it work?

Yes. Our own clinical experience and reports from leading physicians around the world show that CoolSculpting gradually reduces the thickness of the fat layer in specific areas of the body after a single procedure. Published clinical study results indicate an average fat layer reduction of 22% after a single Coolsculpting treatment.

Q: Why choose Union Square Laser Dermatology for CoolSculpting?

Our physicians have extensive clinical experience with CoolSculpting, with Dr. Chapas and Dr. MacGregor being part of the clinical trials that led to the approval of CoolSculpting in the U.S. We continue to work with Zeltiq, CoolSculpting’s manufacturer, on refining treatment protocols, and thus our patients get the benefit of the latest treatment protocols, CoolSculpting applicators and software upgrades. In many situations CoolSculpting works best in combination with other treatments, and our comprehensive range of non-surgical body contouring devices and our expertise in administering these treatments allows us to design the best personalized non-surgical body contouring plan for each patient.

Q: What is the science behind CoolSculpting?

The science behind the Coolsculpting procedure is called Cryolipolysis, which was developed by world-renowned dermatologists at Massachusetts General Hospital in Boston, an affiliate of Harvard Medical School. Their research showed that fat cells are naturally more vulnerable to the effects of cold than other surrounding tissue and structures and that fat cells exposed to precisely controlled cooling can be safely eliminated without harming the skin. This discovery led to the development of the Coolsculpting procedure.

Q: How does CoolSculpting work?

During the procedure, a non-invasive applicator is placed on the patient, and the tissue being treated is brought into contact with cooling panels on the applicator. The Coolsculpting system delivers precisely controlled cooling to target and eliminate fat cells in specific body areas, such as the abdomen, love handles and the back. The fat is cooled over a period up to 1 hourper application site while the patient is sitting comfortably in the office.

Q: Are there any side effects and will patients experience frost bite from the cooling?

The Coolsculpting procedure is totally non-invasive and we have not observed any long-term or significant side effects. There may be some redness in the treated area which can last fromfew minutes to a few hours. Some localized bruising may occur, which typically clears in a few minutes to a few hours. Numbness and mild cramping can occur up to 2 weeks following the treatment. The procedure is designed to deliver precise and controlled cooling to the fat cells below the skin layer without harming the skin.

Q: Are there any clinical studies to support its safety and efficacy?

Clinical studies show that, for properly selected patients, the Coolsculpting procedure is a safe and effective way to reduce the fat layer, without the pain, risk, and recovery time of invasive procedures. The result is a noticeable, natural-looking fat reduction in the treated areas 2 to 4 months after a single Coolsculpting procedure. Better results can be obtained with a second procedure performed 2 months after the first. A multi-center clinical study in the U.S. in which Dr. Chapas and Dr. MacGregor were clinical investigators enrolled hundreds of patients and found that 84% of patients showed noticeable improvement after one procedure over a four month period. Ultrasound images indicated an average fat layer reduction of 22.4%. There were no significant changes to lipid blood levels or liver function during the post procedure period.

Q: What is the cost of the procedure? How many treatments are needed?

The cost varies depending on the areas to be treated and one to three areas can typically be treated in one visit.
A noticeable, measureable fat reduction is typically seen two to four months after a single CoolSculpting procedure. At that point patients can be evaluated to see if they are good candidates for second treatments to achieve further results.

Q: How long before you see the results?

A noticeable, measureable fat reduction is typically seen two to four months after a single coolsculpting procedure.

Q: What types of patients will benefit from the procedure?

Ideal patients are relatively fit, but have some modest-size fat bulges that are not easily reduced by diet or exercise. The Coolsculpting procedure is for spot fat reduction. It is not a way to lose weight, treat obesity or serve as a substitute for invasive or surgical methods like liposuction or tummy tucks.

Q: Is Coolsculpting FDA approved?

The Coolsculpting device is cleared by the U.S. FDA for the treatment of the flanks (love handles) and abdomen.

Q: Does it hurt? What does it feel like?

Our patients find the procedure to be gentle and easy to tolerate. Anesthesia and pain medication are not needed so patients can read a book, listen to music, work on their laptop or just relax during the procedure. When the applicator is placed on the skin, patients feel a pulling from the vacuum pressure that brings the skin into contact with the cooling panels. When the procedure begins, patients feel a cooling sensation that goes away after a few minutes as the cooling produces an anesthetic effect. After the procedure, there is no downtime and patients can resume their normal activities the same day, including work and exercise.

previous arrow
next arrow
ArrowArrow
Slider

Watch Dr. Chapas explain and demonstrate CoolScuplting (at the time known as Zeltiq) on the Rachael Ray show in 2010, shortly after the device was approved by the FDA.

Contact Us

Have a question? Want to schedule an appointment?
Submit the form below and a representative will be in touch shortly.